Prerequisite
The IPv4 WAN connection has been created.
Steps
1. On the navigation tree, click [Network→ WAN→6in4 Tunnel Connection]. The 6in4 tunnel
connection is displayed, see
Figure 9 6in4 Tunnel Connection
Table 9
lists the parameters for 6in4 tunnel connection.
Table 9 6in4 Tunnel Connection Parameter
Parameter
Tunnel Name
New Tunnel Name
WAN Connection
MTU
6in4 Tunnel Type
Tunnel Remote Address
6in4 Tunnel Configuration
Figure
9.
Description
The default is Create Tunnel. Before creating a
new tunnel name, make sure the Create Tunnel
option is selected.
Specify the new tunnel name.
Select the IPv4 WAN connection.
MTU size of the tunnel
There are two 6in4 tunnel types:
Specify the tunnel remote address when the
Manual Tunnel option is selected for the 6in4
Tunnel Type.
The 6in4 Tunnel Configuration includes:
26
Manual Tunnel
6rd
Static
Auto