Configuring Url Filter; Mac Filter Parameters - Zte ZXHN H108N Maintenance Management Manual

Figure 37 MAC Filter
Table 26 lists the MAC filter parameters.
Table 26 MAC Filter Parameters
Parameter
Enable
Mode
Type
Protocol
Source MAC Address/Destina-
tion MAC Address
Note:
If you select Permit from the Mode drop-down list, please add the MAC address of your PC first,
otherwise you cannot access the Web configuration page by using the PC that is connected to
the ZXHN H108N device.
2. Configure the MAC filter parameters, and then click Add.
The MAC filter is configured.
The packets with the specified MAC address are denied or allowed to pass through.

7.4 Configuring URL Filter

This procedure introduces how to configure URL filter rules, so that users are permitted or denied to
access the specific URL addresses.
Description
Enable the MAC filter function.
The mode can be Discard or Permit.
The type can be Bridge, Route, or Bridge+Route.
The protocol that the MAC filter rule will be applied to.
MAC address that needs to be filtered.
Both options cannot be null at the same time.
56