Table of Contents
Advertisement
Chapter 6: EMC emission level protection
To lower the EMC emission level, ferrite cores are installed with one loop (see diagram below)
on the following external cables:
• Ferrite Core (TDK and part number ZCAT3035-1330) — for the triple DS30X I/O cable
(Avaya and part number NTRH2014), at each end of the cable
• Ferrite Core (TDK and part number ZCAT1325-0530) — for the modem power supply
cable, at each end of the cable
• Ferrite Core (Fair Rite and part number 0431164181) — for the Trenton combined
keyboard and mouse Y connector cable, at the server end of the cable
• Ferrite Core (part number WE 742 7111) — for Ethernet port cat5 UTP cable, at the server
end of the cable
Caution:
Risk of equipment damage
The ferrite cores are preinstalled on these customer provided cables. It is not the customer's
responsibility to attach these ferrite cores to these cables. However, the customer should
ensure that these ferrites are in place to keep the EMC emission levels low.
®
Avaya CallPilot
1002rp Server Hardware Installation
for the 1002rp Server
December 2010
59
Advertisement
Table of Contents
