Alarm State - Olimpia BS-1638 Installation, Programming, Use

The first line shows how many zones the system has. It can be 8, 12 or 16 zones.
The last but one line shows the following messages in sequence:
•
How many zones are «IN TEST»
•
How many «FAULTS»
•
How many sections are «DISABLED»
Only the POWER LED should be lit.
Notice. If there are any disabled sections then the corresponding LED will be lit and the screen will show
«DISABLED»

Alarm State

2.3
When a device issues a fire alarm the red LED "General Alarm" is lit. The display will show information
concerning the origin of the alarm as shown below:
Figure 2-5. System in normal operation – quiescent state
9 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 9 from 47