Describing The Interior Of The Panel; Connecting The Power Supply Cables (220-240V Ac) - Olimpia BS-1638 Installation, Programming, Use

Describing the interior of the panel

4.4
To access the interior of the panel we must open the lock on the front lid.
The BS-1638 panel main consists of two sections:
1. The left section which is the lid and contains the main pcb with the controller, the indication pcbs and
the lock.
2. The right section contains the power supply, the zone and input/output pcbs, the battery compartment
and the cable entry holes.

Connecting the power supply cables (220-240V AC)

4.5
The panel has cable entry holes for all the cables. You can connect cables with a maximum diameter of
2.5mm to the terminal blocks.
The power supply cables of the panel must be with double insulation. The power supply cable must also
contain a power earth cable that must be connected to the main power earth connection of the building.
Figure 4-21. Panel Interior
27 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 27 from 47