General Information; Description; Safety - Olimpia BS-1638 Installation, Programming, Use

1 General information

Description

1.1
The family consists of 3 panels (8, 12 and 16 zones) with identical controls and indications. They have 2
outputs for sirens, an alarm relay, a fault relay and a programmable auxiliary relay. For there operation,
two A-986 (12V/7Ah) batteries are required. Alternatively two Α-961 (12V/9Ah) batteries can be used for
greater autonomy.
In detail the BS-1638 panel has 8 zones, the BS-1642 has 12 zones and the BS-1646 has 16 zones.
All functions and indications are according to the European norms ΕΝ 54-2 and ΕΝ 54-4.
The panels offer up to 16 zones and are suitable for large installations such as shopping malls, hotels
and factories.
They offer a wide range of settings and characteristics for controlling the installation equipment and
sirens which can be easily adjusted using a P/C via an Ethernet connection.

Safety

1.2
A device cannot be considered that it is used correctly if you do not read the accompanying
documents that are supplied.
This product must be installed, commissioned and serviced only by qualified and trained personnel
according to:

The regulations concerning the installation of electrical devices in a building.

The fire safety regulations.
The instructions of the manufacturer.

- The product operates with a voltage of 220-240V ΑC/50-60Hz and is a class 1 unit. (For safety and
operation reasons it is required that the power earth cable of the building is connected).
- It must be installed to the current electrical installation using a dedicated fuse with a label «Fire
detections system – Do not close the switch».
Congratulations for your selection to buy this product.
Olympia Electronics - European manufacturers.
4 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 4 from 47