Document Code 921163800_09 - Olimpia BS-1638 Installation, Programming, Use

The LEDs are divided into groups and colorings so the indications are more comprehensive.
In detail, the indications of the LEDs correspond to the following case:
Figure 1-3.
The following figure shows the indicators that are below the LCD screen. All of these indicators are
yellow.
Indication LEDs
Alarm Zone [red]
General Alarm [red]
Power [green]
Disable
General
[yellow]
Test
DELAYS ON [yellow]
Zone
Fault –
Siren 1
Disable
[yellow]
Siren 2
7 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 7 from 47
Alarm in the
corresponding zone
The system is in an alarm
state
General power indicator
of the panel.
General disable indicator
(disabled sections)
The system is in a test
state.
Active delays for the
outputs.
Blinks when there is a
fault on the zone.
Always ON when the
zone is disabled.
Blinks when there a fault
on siren1.
Always ON when Siren 1
is disabled.
Blinks when there a fault
on Siren 2.
Always ON when Siren 2
is disabled