Resetting The Alarm Counter; Network Settings; Technician Menu Using The Ethernet - Olimpia BS-1638 Installation, Programming, Use

Resetting the alarm counter

5.5
This option gives us the capability to reset the alarms counter. The alarms counter is a counter that
counts all the alarm events and does not reset but only with this option. This option is issued in access
level 4, that is why the DipSwitch 1 on the screen pcb must be in the ON position.

Network settings

5.6
Selecting NETWORK and pressing Enter shows us the option for networking
the panel. The panel can be connected to the network in order to cooperate
with other panels of to be programmed with a P/C. We can see if the panel
has an Ethernet card installed if we open the front lid. The Ethernet card will
be connected to the pcb located on the lid of the panel. On this card we can
see the characteristic RJ-45 connector.
If there is an Ethernet card installed select the option ETHERNET PCB and
press Enter. In the next screen select ACTIVE and press Enter.
If we select IP ADDRESS and press Enter we see the adjacent screen. The
panel must have an address that is part of the network that it belongs to. Ask
your network manager to provide this address for you. The programming of
the address is done using the arrow keys. With the up-down keys we can
change the value of a digit and with the right-left keys we can change the
digits. When the required IP address has been entered press Enter. By
default the address is 10.0.1.149.
After any change in the network settings we must select the option RESET
ETHERNET. This is to initialize the card with the new settings. The screen
with show a message and it will return to the network menu.

Technician menu using the Ethernet

5.7
The programming of the panel can be done either by using the built-in keyboard and screen or
alternatively by using a P/C. The default IP address is 10.0.1.149. This can be changed to your
preference and according to your network as it has been done in the screen shots below.
41 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 41 from 47