Use A P/C To Access The User Menu; Using A Personal Computer - Olimpia BS-1638 Installation, Programming, Use

Use a P/C to access the user menu

3.5
The programming of the panel can be done using the panels own keyboard or by using a personal
computer. If we have a network of panels then some options can only be done using a computer.

3.5.1 Using a personal computer

To program the panel using the P/C no special software is required. A common web browser (Chrome,
Firefox, Internet Explorer κ.λ.π), can be used. We suggest Google Chrome. The following screens are
from Google Chrome. Prerequisites are that the panels must have an Ethernet card installed, we must
know the IP address of the panel, the P/C must be connected to the same network as the panel and the
network setting of the P/C must be correct. With suitable settings we can have access to the panel via
internet from what every part of the world we require. All these settings must be adjusted by the network
manager of the building.
Our first action is to open a web browser and in the URL address line we must enter the IP address of
the panel. If all is connected correctly then we will see the following screen.
The pre-installed IP is 10.0.1.149.
On the right we can see information of the system and its operation state.
All the functions in the section"LINΚS" on the left are available to the user. The TECHNICIAN MENU is
not available.
21 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 21 from 47