5 Technician Menu
This section will cover all the options that are available in the Technicians Menu ( access level 3 and 4).
To enter the main menu of the panel press «ENTER» while in the initial screen.
Next select «TECHNICIAN MENU» and press «ENTER».
A code is required to enter access level 3.
To select the code use the keys up, down, to increase the value of the digit and the keys right-left to
change digits. After entering the complete code press Enter.
The factory default code is «2333».
Figure 4-29. Installing an Ethernet card
Figure 5-30. Main Menu
Figure 5-31. Technician code
35 / 47
Date
30/9/2016
File
Document code
921163800_09_007
Page
35 from 47