Olimpia BS-1638 Installation, Programming, Use page 42

Select the link TECHNICIAN MENU and the following screen is shown.
Place the cursor in the code entry field and type the correct technician code. After press SEND. If the
code is correct then we can see the TECHNICIAN MENU as below.
The structure of the menu is the same as in the technicians menu on the panel apart from some
difference that can only be programmed from the P/C and are not available in the corresponding
technician menu on the panel, such as changing the name of the zones.
Below are referenced in detail the options that are available only via the P/C.
42 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 42 from 47