Reset Defaults; Annual Check Done; Changing The Technician Code; Clearing The Events Log - Olimpia BS-1638 Installation, Programming, Use

5.3.3 Reset defaults

To initialize all settings to the factory defaults select RESET
DEFAULTS and press Enter. When you see the message in the
adjacent screen the operation has finished. Next the panel will
initialize and start for the main screen.

5.3.4 Annual check done

If we have a message for annual maintenance and we want to erase
the message select the option ANNUAL CHECK DONE and press
Enter. When you see the message in the adjacent screen the
operation has finished.

5.3.5 Changing the technician code

By selecting CHANGE TECH CODE we see the adjacent screen. Use the
up-down keys to increase or decrease the value of each digit and the right-
left keys to change the digit. Once the new code has been entered press the
ENTER key. The new code is also valid from programming with a P/C.
Finally there is the «MANUFACTURER MENU»

Clearing the events log

5.4
Selecting CLEAR EVENTS LOG and pressing Enter shows us the adjacent
screen. The panel requests confirmation. If we really want to clear the log
select YES and press Enter.
Erase the events log immediately after finalizing the installation.
40 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 40 from 47