Zone Information - Olimpia BS-1638 Installation, Programming, Use

The option «SIRENS» reveals the setting of the 2 sirens.
If we select NETWORK and press ENTER we can see the adjacent screen.
This screen shows if the Ethernet card is installed. If it is installed then we
can see its IP and MAC address. Press the ESC key to return to the
INFORMATION MENU.
By selecting the TECHNICIAN INFO we can see the adjacent screen. By
default we see that the technician information has Olympia electronics, the
phone number and the installed site name. This information can be changed
by using a P/C.
Press ESC to return to the INFORMATION menu.
If we select PANEL SOFT VERSION we can see the installed panel firmware
version.
Press ESC to return to the INFORMATION menu.

2.7.1 Zone Information

In the zones information menu we can see the following options:
Figure 2-14. Zone information.
15 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 15 from 47