Indicators And Controls; Fascia Of The Panel - Olimpia BS-1638 Installation, Programming, Use

Indicators and controls

1.3
We can read messages in the graphical display area whereas the LED indicators show basic warnings
(alarms, faults, disabled sections).
The front of the panel has all the required controls for its operation.
The operation of the panel is done easily using the 8 button keyboard.
In general we can see:

1.3.1 Fascia of the panel

Status
Indication LEDs
Alarm Zone
status
indication
LEDs
Figure 1-1. Fascia of the panel
Liquid Crystal
Display
Operation
Keyboard
Lock
5 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 5 from 47
The panel has a liquid crystal
display and an array of indicator
LEDs via which the user can see its
status.
The LEDs give us general
information (for example, if we have
an alarm the General Alarm led will be
lit.) and the display shows additional
information for the event. ( e.g. Alarm
1, on Zone 7 on the 2nd floor).
To the right of the screen we can
see 8 keys that are used to operate
the panel. These keys correspond to
basic operations of the panel such as
navigating left, right, up or down,
enter (select), esc (exit or one level
back) e.t.c (see below).
In general, with the pressing of a key
we can either do an operation or a
menu with various options is shown.
(see paragraph 1.3.2).
The panel also has a safety lock
(see Figure 1-1).