Events Menu; Test Led; Information - Olimpia BS-1638 Installation, Programming, Use

•
USER MENU : This menu contains all the functions the can be selected by a user that has
access level 2 clearance.
•
TECHNICIAN MENU : This selection can only be selected by the technician and contains the
panels programming functions.
•
ALL EVENTS : In this selection we can see all the events of the panel.
•
INFORMATION : This selection contains information of the system that can be accessed by
every user.
•
TEST LED : All the indicators are lit. It is identical in operation as the «LAMP TEST» key.
To select a function use the «UP» and «DOWN» keys and then press «ENTER».

2.6.1 Events Menu

If we select the ALL EVENTS option and press the ENTER key then we will
see the adjacent screen. The first screen shows information that was
recorded and the second screen shown faults.
On all screens that contain information we can see a
Next to this on the right we can see the source of the event (in our case
GENERAL PANEL. Below this there is a detailed description of the event and
then the time and date. The last line shows the current event number as well
as the total events recorded.
On fault screens we can see an
see the source of the fault (in our case Zone 6). The next line shows the
name of the zone followed by the date and time. The last line shows the
current fault number as well as the total number of recorder faults.
With the up and down keys we can scroll through all the events. Pressing the
ESC key will takes us back to the previous menu.

2.6.2 Test Led

If we select TEST LED and press ENTER we will see the adjacent screen. All
the LEDs will be lit so we can verify the good operation. Press ESC to go to
the previous menu.

Information

2.7
i
on the top left corner.
Χ
on the top left corner. Next to this we can
13 / 47
Date 30/9/2016
File
Document code 921163800_09_007
Page 13 from 47
Figure 2-11. Events Menu
Figure 2-12. LED test