Disassemble Rod And Da Blower Module - Barco CLM W6 Service Manual

Chapter 2 Disassembly Process
2-16 Disassemble ROD and
DA blower module
. Unscrew  screw (red circle) to
remove thermal sensor board.
2. Unscrew 2 screws (yellow circle) to
remove ROD and DA blower module.
3. Unscrew 2 "-" screws (green circle) to

disassemble ROD and DA blower module.

2-30
CLM W6_CLM HD6 Jan 3, 202