Disassemble Front Cover Module - Barco CLM W6 Service Manual

Chapter 2 Disassembly Process
2-7 Disassemble Front
Cover Module
. Unscrew 4 screws (red circle), pull
down the front cover (orange arrow).
2. Unplug 2 connectors (yellow square) to

disassemble Front cover module.

3. Use a tweezers to open  clip (yellow
square).
4. Remove front IR sensor board.
5. Unscrew 2 screws (yellow circle),
remove IR cover.
2-2
IR
CLM W6_CLM HD6 Jan 3, 202
IR Cover