Chapter 5 Firmware Upgrade
5. Firmware Upgrade
Section 1: System Firmware Upgrade
5-1-1 Equipment Needed
Software:
- CLM W6_Main Board FW_xxxx
Note: ''xxx'' represent software version.
Hardware: - Projector
- Power Cord: 42.505G00
- "Cross over" female-female RS232 cable: 42.86603G00
- PC or Laptop
Note: - The FW upgrade procedure for CLM HD6 is the same as CLM W6, we take CLM W6
as an example here.
CLM W6_CLM HD6 Jan 3, 202
5-