Disassemble Left Lamp Driver - Barco CLM W6 Service Manual

Chapter 2 Disassembly Process
5. Tear off  mylar (yellow square).
Repair note: - Please stick the mylar (yellow
square) as it was when assemble
LVPS module.
6. Disassemble LVPS.
2-21 Disassemble Left Lamp
Driver
. Tear off  mylar (red square).
2. Unscrew 3 screws (yellow circle) to
remove Left Lamp Driver module.
2-46
CLM W6_CLM HD6 Jan 3, 202