Remove The Non-Ust Boresight Module - Barco G62 Series Installation Manual

3.7 Remove the non-UST boresight module

How to remove
1. Remove the non-ultra short throw (non-UST) lens.
2. Disconnect the lens cable (see red reference) in LSM type1.
LSM type1
Image 3–9
3. Remove the screws (inside red circles) securing the non-UST lens boresight plate with a Philips #2
screwdriver.
LSM type1
Image 3–10
Note: To have better visibility for the lens holder, you can stand the projector with the lens opening
facing up.
4. Remove the non-UST lens boresight module from the projector.
UST lens R9801785(1)
LSM type2
LSM type2
R5914654 /04 G62 series 43