Table of Contents
Advertisement
Chapter 4 Function Test & Alignment Procedure
- Select "Control", press "Enter" button.
- Select "Network", press "Enter" button.
- Press "Select" button to select "DHCP Off".
- The IP address will be shown on screen.
- Write down the IP address: 92.68.0.00.
2. Network Setting
Note:
- Network setting action should be done on the PC
(other actions were on the projector)
() Double click the "Local area connection", choose
"Properties".
(2) Select "Internet protocol (TCP/IP)", then click
"Properties".
4-4
CLM W6_CLM HD6 Jan 3, 202
Advertisement
Table of Contents
