Configuring Poe Port Power Limits - Avaya 8300 Configuration

PoE configuration using the ACLI
is allocated power while the port with the lowest priority may not be allocated power. If ports
have the same priority setting, the lowest port ID has the highest priority.
Variable definitions
Use the data in the following table to help you use the poe priority port<portlist>
command.
<low|high|critical>

Configuring PoE port power limits

Configure PoE port power limits for power allocation on the Avaya Ethernet Routing Switch
8300.
Prerequisites
You must log on to the Interface Configuration mode in the ACLI.
Procedure steps
Configure the PoE port power limit by using the following command:
poe limit port<portlist>
Variable definitions
Use the data in the following table to help you use the poe limit port<portlist>
command.
Variable
<3-16>
56 Configuration — Power over Ethernet
Variable
Sets the priority for power allocation. The priority can be
low, high, or critical. The default is low.
The value to set for the port PoE power limit.
Value
Value
May 2011