Protecting The Environment; Installer Checklist To Be Completed By Installer Upon Installation - Bosch Greentherm T9900 SE 160 Installation And Operating Instructions Manual

Protecting the environment

13 Protecting the environment
Packing
The packing box may be fully recycled as confirmed by the
recycling symbol .
Components
Many parts in the heater can be fully recycled in the end of the
product life. Contact your city authorities for information about
the disposal of recyclable products.
Saving water resources:
▶ Make sure you close all the taps after any use. Avoid leaving
the taps dripping. Repair any leaking tap.
▶ Define the temperature you want, in the appliance or with
the remote control. This way you have the precise water
flow needed (mixing cold water to regulate temperature will
increase the water flow with consequent waste of water).
76
14 Installer Checklist to be completed by
installer upon installation
1)
Serial Number
2)
Gas Pressure Reading
Static
Operating
Water Pressure
Building Water Pressure
Pressure Range if on Well
system
Installing Company
Installer name
Address
Phone
1) Serial number is located on the rating plate which is
located on the left side (when facing appliance front) of the
cover.
2) See Chapter 4.13 and gas pressure table (to be filled out
by installer)
Table 30
Installation manual should be left with the owner after the
installation is tested and completed. Additional copies of the
installation manual are available at
www.boschheatingandcooling.com.
Greentherm T9900 SE/i – 6 720 813 635 (2019/03)
___ ___ ___ ___ ___ ___ ___ ___