Protecting The Environment; Installer Checklist To Be Completed By Installer Upon Installation - Bosch Greentherm T9800 SEO199 Installation And Operating Instructions Manual

Table of Contents

Advertisement

14

Protecting the environment

Packing
The packing box may be fully recycled as confirmed by the
recycling symbol
.
Components
Many parts in the heater can be fully recycled at the end of the
product life. Contact your city authorities for information about
the disposal of recyclable products.
Saving water resources:
▶ Make sure you close all the taps after any use. Avoid leaving
the taps dripping. Repair any leaking tap.
▶ Define the temperature you want, in the appliance or with
the remote control. This way you have the precise water
flow needed (mixing cold water to regulate temperature will
increase the water flow with consequent waste of water).
Greentherm T9800 SEO 160/199 | SECO 199 – 6 720 817 281 (2018/12)
15
Installer Checklist to be completed by
installer upon installation
1)
Serial Number
2)
Gas Pressure Reading
Static
Dynamic
Water Pressure
Building Water Pressure
Range if on Well system
Installing Company
Installer name
Address
Phone
1) Serial number is located on the rating plate which is
located on the left side (when facing appliance front) of the
cover.
2) See Chapter 4.13, page 25 and gas pressure table (to be
filled out by installer)
Table 21
Installation manual should be left with the owner after the
installation is tested and completed.
Protecting the environment
___ ___ ___ ___ ___ ___ ___ ___
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Greentherm t9800 seo160

Table of Contents