Download  Print this page

Bosch Greentherm T9900 SE 160 Installation And Operating Instructions Manual page 55

Indoor residential tankless water heaters, 160 000/199 000 btu- natural gas 160 000/199 000 btu - liquefied petroleum lp gas
Hide thumbs

Advertisement

▶ Touch the symbol
▶ To save the password use the symbols
select END.
▶ Touch the symbol
▶ Touch the symbol
Display shows temperature value.
HT Hotspot option is defined.
▶ Download the "Bosch Water" app, available for Android and
IOS for communication with the water heater, see fig. 51.
Do not open the Bosch Water app.
▶ In the smartphone, go to;
Settings > Wireless and Networks> Wi-Fi.
▶ Select the network named "waterheater-xxxxxx", where
"xxxxxx" is the last 6 digits of the "MAC" address.
▶ Write the same password you defined in HT Hotspot menu.
▶ Open the app and follow the instructions.
▶ Use the smartphone to scan the QR code located on the left
side of front cover.
▶ Define a User password in the Bosch Water app.
Wi-Fi module is activated.
Bosch Water app
Fig. 51
Bosch Water APP
6.9.2 Wi-Fi options
After connecting the appliance to a network, the only available
menus in A7 Wireless Connectivity will be the following:
ST Status
DI Disconnect
RE Reset
MA MAC Address
IP IP Address
How to access the Wi-Fi options:
▶ Touch the symbol
Display shows P4 Information.
▶ Touch the symbol
Settings.
▶ Touch the symbol
Greentherm T9900 SE/i – 6 720 813 635 (2019/03)
, to confirm each letter or symbol.
or
.
to return to main menu.
.
until the display shows SA
.
▶ Use the symbols
Connectivity.
to
▶ Touch the symbol
Display shows Wi-Fi,
▶ Touch the symbol
▶ Use the symbols
list.
ST Status
Display shows the status of wireless connection:
connected
disconnected
hotspot
If HMI is connected to a wifi network, display shows the wireless
connection name.
DI Disconnect
▶ Choose DI Disconnect.
▶ Choose the symbol
Display shows, Are you sure?
– Yes
– No
▶ Choose Yes.
A green check mark is displayed indicating that the
appliance is disconnected from the network.
RE Reset
Choose this option to reset all Wi-Fi connection parameters or
User password defined in the Bosch Water app.
▶ Choose RE Reset.
▶ Touch the symbol
Display shows,
– RW Reset Wi-Fi
– RU Reset User Passwords
▶ Use the symbols
list.
▶ Touch the symbol
Display shows,
– Yes
– No
If choose Yes,
1) Reset all Wi-Fi network connections.
2) Reset User password defined in the Bosch Water app.
Operation instructions
or
to choose A7 Wireless
.
.
or
to select one option from the
.
.
1)
2)
or
to select one option from the
.
55

Advertisement

loading

  Related Manuals for Bosch Greentherm T9900 SE 160

This manual is also suitable for:

Greentherm t9900 se 199Greentherm t9900 se/i 199