Air Cleaner; Cab Filtration; Hitches; After Work With Front Implements And In Case Of Cooler Clogging - Zetor Proxima GP Series Operator's Manual

PREVENTIVE DAILY SERVICE

Air cleaner

Cleaner maintenance must be done after signalization of
indicator contamination.
Indicator is accessible after opening front tractor bonnet. It
is placed close to the bend of sucking pipeline.
Contamination is mechanically signalized by a red field
which is shown after filter insertion clogging directly on
contamination indicator.
G710b

Cab filtration

Check and if necessary clean the cab ventilation air filters
installed in the front overhang of the roof.
The filter exchange interval depends on the dustiness of
the working environment.
Partial regeneration can be performed by beating out or
blowing with compressed air.
Do the cleaning or replacement of the filter elements after
removing the covering grills in the roof overhang.
At the customer's request we supply filters with active
carbon.
Don't clean the filter; don't flush it with
compressed air.
F_02_9

Hitches

Check the condition of the hitching and attachment
systems of the tractor and trailer.
F18
After wirk with front implements and in case of cooler clogging
After work with front implements:
- Check the connections of the external hydraulic circuit of
the control of the front three-point hitch for leaks
Clogging of the coolers:
- Release and slide the cooler to the left side of the tractor.
- Clean the front walls of the engine (gearbox, air-
conditioning condenser) cooler with compressed air (blow
air in the direction from the engine).
- Remove residual dirt from the space under the hood so
that it should not be suctioned again.
C113
23