Uncoupling Of A Single-Axle Trailer; Hook Of The Mounting For A Single-Axle Trailer; Coupling With A Trailer Or Semi-Trailer - Zetor Proxima GP Series Operator's Manual

Uncoupling of a single-axle trailer

This can be performed after slight lifting of the hitch by the
inner hydraulic circuit lever.
Move the control lever backwards.
The lever is located on the left side of the driver's seat.
Lower the hitch using the inner hydraulic circuit lever and
disconnect the trailer pole eye.

Hook of the mounting for a single-axle trailer

The hook of the mounting for a single-axle trailer is
located in the bracket on the left-hand side of the cabin
back wall.

Coupling with a trailer or semi-trailer

The tractor can be coupled only with a tractor trailer after
matching of operating brakes of the tractor and pneumatic
or hydraulic brakes of the trailer.
In case of coupling with a semi-trailer the static loading of
the rear axle of the tractor may not exceed the maximum
permitted value.
TRANSPORT USE
74
E311
G313
G900a