Other Maintenance; Checking The Belt Drive; Replace V-Rib Belt; Check And Clean The Air Cleaner According To The Following Instructions - Zetor HORTUS HS CL Operator's Manual

Other Maintenance

Checking the Belt Drive

Caution:
Only carry out work on the belt drive with the engine at a standstill !
After repair work: Check that all guards have been replaced and that all tools have been
removed from the engine.
Check the whole belt drive visually for damage.
Renew damaged parts.
Remount protective devices if necessary.
Pay attention to correct fit of new belts, check the tension after running for 15 minutes.

Replace V-rib Belt

1 - Tension pulley
2 - Retaining pin
3 - Assembly bore
Press tensioning roller with socket wrench in the direction of the arrow until a retaining pin can be
fixed in the assembly bore. The V-ribbed belt is now tension free.
First pull the V-ribbed belt off the smallest roller or off the tensioning roller.
Mount new V-ribbed belt.
Retain tensioning pulley using the pin wrench and remove the holdfing pin.
Tension V-ribbed belt using the tensioning roller and socket wrench. Check whether the V-ribbed belt
is correctly in its guide.

Check and Clean the Air Cleaner According to the Following Instructions

1 - Body
2 - Filter
3 - Element
4 - Evacuator valve
MAINTENANCE
99
HODP139
HODP140