Crestron 3 Series Reference Manual page 60

The following parameters are dependent on the type of action taken:
•
•
Sample Results File
The following is an example of a results file for a 3-Series Control System (PRO3)
.puf file automatic update:
{
"ControllerHostName": "Crestron-PRO3",
"deviceModel": "PRO3",
"updateAction": "firmware",
"updateLog": [
{
]
}
}
56 • 3-Series Control Systems
result: The result of the action, which is one of the following:
o
success: The action succeeded.

error: The action failed. See "Error Handling" on page 57.

estActionDuration: The estimated time to complete the action (in
o
seconds) where applicable
errorCode: The error code number (if applicable)
o
errorText: Any text that is associated with the error condition (if
o
applicable)
numberOfSubActions: The number of sub actions that are associated
with the main action taken by the client.
subActions: A sequence of sub action results that are associated with
the main action taken by the client.
command: The console command executed by the client
o
commandResult: The result text returned to the console when
o
executing a console command
"fileName": "xx.txt",
"fileHash": "HASHCODE",
"whenWasDownloaded": "2014-08-29T23:05:10Z",
"whenWasApplied": "2014-08-29T23:15:10Z",
"whenWasCompleted": "2014-08-29T23:25:10Z",
"numberOfSubActions": "2",
"subActions": [
{
"component": "eboot",
"result": "success",
"PreviousVersion": "1.001.0033",
"CurrentVersion": "1.001.0034",
}
{
"component": "updater",
"result": "success",
"PreviousVersion": "1.02.35",
"CurrentVersion": "2.001.0034",
}
Reference Guide – DOC. 7150B