Blocked User Functions; Blocked Ip Address Functions - Crestron 3 Series Reference Manual

Blocked User Functions

If authentication is enabled, administrators are able to block users from
accessing the control system via the console and Crestron Toolbox.
Add User to Blocked List
To add a user to the blocked list, issue the ADDLOCKEDUser command.
•
•
Remove User from Blocked List
To remove a users from the blocked list, issue the REMBLOCKEDUser command.
•
•

Blocked IP Address Functions

When a user reaches the maximum number of login attempts over an Ethernet
connection, the client's IP address is blocked.
Change Lock out Time
To change the duration (in hours) that an IP address is blocked by the console,
issue the SETLOCKOUTTIME command.
•
•
18 • 3-Series Control Systems
Syntax: ADDLOCKEDUser [name]
name: Enter the user account that will be blocked.
o
No parameter: Lists all blocked user accounts
o
Example: ADDLOCKEDUser jsmith1
Syntax: REMBLOCKEDUser [name]
name: Enter the user account that will be removed from the blocked
o
list
No parameter: Lists all blocked user accounts
o
Example: REMBLOCKEDUser jsmith1
Syntax: SETLOCKOUTTIME [number]
number: The number of hours to block an IP address. Entering 0 blocks
o
the IP address indefinitely. 255 is the maximum value. The default
value is "24."
No parameter: Displays the current setting
o
Example: SETLOCKOUTTIME 24
Reference Guide – DOC. 7150B