User Group Rights - Crestron 3 Series Reference Manual

Add User to Group
To add a local or an Active Directory user to a local group, issue the
ADDUSERTOGROUP command.
•
•
Local users are created on the control system without any access rights. Adding a
user to a local group grants the user the access level assigned to the group.
NOTE:
Directory service, but it can grant an access level to an existing Active Directory
user. This may be accomplished either by adding the Active Directory user to a
local group on the control system or by adding the Active Directory group(s) of
which the user is a member to the control system.
Remove User from Group
To remove a local or an Active Directory user from a local group, issue the
REMOVEUSERFROMGROUP command.
•
•

User Group Rights

The control system architecture supports multiple user groups (either locally or
from the Active Directory service). Any user can be a member of multiple groups.
Both local and Active Directory groups can be given the following rights based on
the chosen access level. The numbers associated with these rights correspond
with the table on the following page.
1.
2. Using a customer web XPanel interface
3. Using the built-in web XPanel interface
4. Logging in to connect to CIP/gateway connections
5. Inputting administrator commands, such as ones dealing with user
6. Inputting programmer commands, such as ones dealing with loading
7. Inputting operator commands, such as ones that restart programs
Reference Guide – DOC. 7150B
Syntax: ADDUSERTOGROUP -N:username -G:groupname
-N: Specifies the name of the local or Active Directory user
o
-G: Specifies the name of the local group
o
Example: ADDUSERTOGROUP -N:jsmith1 -G:CresProgs
The control system cannot create or remove a user from the Active
Syntax: REMOVEUSERFROMGROUP -N:username -G:groupname
-N: Specifies the name of the local or Active Directory user
o
-G: Specifies the name of the local group
o
Example: REMOVEUSERFROMGROUP -N:jsmith1 -G:CresProgs
Logging into console and having access to read-only system
status/setting commands
accounts and changing system settings
programs and loading files
3-Series Control Systems • 13