Firmware Updates - Crestron 3 Series Reference Manual

Firmware Updates

To take advantage of all the latest device features, the control system should
always contain the latest firmware, which is available for download at
www.crestron.com/Support.
NOTE:
Service Providers (CSPs), and Crestron partners only. New users must register
for an account to access certain areas of the Crestron website. For more
information on registering, navigate to https://www.crestron.com/register.
To perform a firmware update:
1.
2. Use an SFTP client to transfer the firmware .puf file to the control
3. Issue the PUF <filename> command in the control system console, where
NOTE:
update mechanism. For more information, refer to "Auto Update Mechanism" on
page 46.
The Package Update Tool in Crestron Toolbox can also be used to send firmware
to the control system and to manage the firmware update. For more
information, refer to the Crestron Toolbox help file.
28 • 3-Series Control Systems
Access to firmware is reserved for Authorized Crestron dealers, Crestron
Download the latest device firmware (.puf file) at
www.crestron.com/Support.
system's /firmware directory.
<filename> is the complete filename of the .puf file.
Firmware updates can be scheduled using the control system's auto
Reference Guide – DOC. 7150B