Crestron 3 Series Reference Manual page 11

5. Enter the following search parameters for the device (required only if
6. Enter the following advanced authentication parameters for the device (if
7. Click OK.
The device status reports as "Connected" at the bottom of the selected tool if
communications have been established.
Text Console - Connection Status
The USB connection information for the control system may be saved using the
Address Book function in Crestron Toolbox. For more information, refer to the
Crestron Toolbox help file.
Reference Guide – DOC. 7150B
multiple USB connections are active):
Model: Enter the model name of the Crestron device (for example,
•
PRO3). The model is not user-defined; it is the actual model name of
the device as displayed in the System Info tool (under Device Name in
the Product Info section)
Hostname: Enter the user-defined hostname, as previously assigned
•
in the TCP/IP settings
Serial: Enter the serial number (not the model number or TSID) of the
•
Crestron device. The serial number is a seven digit number (not
beginning with 60 or 65) that may contain letters. The serial number is
printed on a sticker affixed to the device.
required):
Username: Enter the username required to authenticate device
•
communications
Password: Enter the password required to authenticate device
•
communications
3-Series Control Systems • 7