Crestron 3 Series Reference Manual page 56

UserPrograms
This parameter indicates that a user program should be updated. The following
keywords are defined for this parameter:
•
•
Sample Manifest File
The following shows a complete example of a JSON-encoded manifest file for a
control system with multiple components. Note that actions are performed in the
order that they appear on the file.
[
{
"deviceHostname": "Room101-panel",
"deviceModel": "TSW-760",
"deviceId": "QA",
"controlSystemHostname"": "192.186.1.1",
"logFolder": "sftp://xxabet-xx2/html/Office-TouchPanel/results",
"fileToUpdate": [
{
"fileUrl": "sftp://xxabet-xx2/html/Office-TouchPanel/xx.puf",
"fileHashUrl": "sftp://xxabet-xx2/html/Office-TouchPanel/firmwareHash.txt",
"fileType": "firmware",
"whenToDownload": "Friday 23:00",
"whenToApplyUpdate": "now",
}
]
}
{
"deviceHostname": "Room101-panel",
"deviceModel": "TSW-760",
"logFolder": "sftp://xxabet-xx2/html/Office-TouchPanel/results",
"fileToUpdate": [
{
"fileUrl": "sftp://xxabet-xx2/html/Office-TouchPanel/xx.ini",
"fileHashUrl": "sftp://xxabet-xx2/html/Office-TouchPanel/configHash.txt",
"fileType": "config",
"whenToDownload": "Sunday 2:00",
}
{
"fileUrl": "sftp://xxabet-xx2/html/Office-TouchPanel/xx.vtz",
"fileHashUrl": "sftp://xxabet-xx2/html/Office-TouchPanel/projectHash.txt",
"fileType": "project",
"whenToDownload": "Sunday 2:00",
}
]
}
{
"ControllerHostName": "Crestron-PRO3",
"deviceModel": "PRO3",
"logFolder": "sftp://xxabet-xx2/html/Office-PRO3/results",
"fileToUpdate": [
{
"fileUrl": "sftp://xxabet-xx2/html/Office-PRO3/program1.lpz",
52 • 3-Series Control Systems
"programNumber": Valid ranges are 1-10 or 1 only, and the range depends
on the controller to be updated. The Program ID tag is intended for
interactive systems only. The default value is "1".
"programLocation": Indicates whether the program needs to be loaded
onto internal or external memory. The default value is "internal". For
external memory, the controller loops through RM and RM2.
Reference Guide – DOC. 7150B