Control Board And Scaner Contorol Board Removal - Ricoh Bizworks 106 Service Manual

18 May, 1999 OTHERS
6.5.4 CONTROL BOARD AND SCANER CONTOROL BOARD
REMOVAL
ø ø ø ø CAUTION FOR LITHIUM BATTERY (MEMORY BACK-UP)
The danger of explosion exists if a battery of this type is incorrectly
replaced. Replace only with the same or an equivalent type
recommended by the manufacturer. Discard used batteries in
accordance with the manufacture's instructions.
Preparation
1) Remove the lower unit shell.
A: Clamp
B: Clamp
C: Fan motor connector (G025 only)
D: Board assembly (2 Philips screws)
Disconnect the board assembly from the connector [E] on the mechanical control
board.
G025 G027
[B]
[B]
[D]
[D]
[A]
[A]
[C]
G027R042.WMF G027R002.WMF
[E]
[E]
6-45