Cisco UCS S3260 Service Manual page 56

Installing or Replacing System Components
Install a new drive:
Step 3
Align the new drive with the empty bay and then push the drive in until it touches the board
a.
connector and the drive lever begins to close.
Press the drive lever down flat until it clicks and locks.
b.
Figure 3-11
1 Drive lever
2 Release button
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
3-22
Drive Expander Module Drive Carrier Features
1 2
Chapter 3
3
4
3 Drive fault LED
4 Drive activity LED
Maintaining the System