Cisco UCS S3260 Service Manual page 40

Status LEDs and Buttons
Table 3-2 Rear-Panel LED States (continued)
LED Name
8 Not used at this time.
9 10/100/1000 dedicated
management link activity
10 10/100/1000 dedicated
management link speed
11 Solid state drive activity
12 Solid state drive fault
13 Not used at this time.
14 SIOC health
If your system has an optional drive expander module, it has one module status LED:
Table 3-3
LED Status
Off
Green
Amber
Amber
Amber
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
3-6
State
•
Off—No link is present.
•
Green—Link is present, no activity.
•
Green, blinking—Link is present, with activity.
•
Off—Link speed is 10/100 Mbps.
•
Green—Link speed is 1 Gbps.
•
Off—There is no drive connected.
•
Green—Drive connected, no activity.
•
Green, blinking—The drive is reading or writing data.
•
Off—The drive is operating properly.
•
Amber—This drive has failed (or the Locate function has been activated for the
•
drive).
•
Off—System is idle.
•
Green—SIOC is working normally.
•
Green, blinking—There is a problem with the SIOC or a component in the SIOC.
•
Drive Expander Module Status LED
HDD
P3V3 P5V Present
None None None
On On Plug-in
On On No plug-in
On Fail No plug-in
On On Plug-in
Chapter 3
HDD Status
None
Good
NA
NA
Fail
Maintaining the System