Features - STMicroelectronics STM32H7 Nucleo-144 User Manual

Features

1 Features
The STM32H7 Nucleo-144 boards offer the following features:
•
STM32H7 Arm
•
Ethernet compliant with IEEE-802.3-2002 (depending on STM32H7 support)
• USB OTG full-speed
•
3 user LEDs
• 2 push-buttons: USER and RESET
•
LSE crystal:
–
•
Board connectors:
–
–
–
•
Board expansion connectors:
–
–
•
Flexible power-supply options: ST-LINK USB V
•
On-board STLINK-V3 debugger/programmer with SWD connector:
–
–
•
Comprehensive free software libraries and examples available with the STM32Cube
package
•
Supported by wide choice of integrated development environments (IDEs) including
IAR
a. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
6/48
®(a)
Cortex
32.768 kHz crystal oscillator
USB with Micro-AB
Ethernet RJ45
MIPI10
ST Zio including Arduino
ST morpho
USB re-enumeration capability: virtual COM port, mass storage, debug port
STLINK-V3 standalone kit capability
™ ®
, Keil and GCC-based IDEs
®
core-based microcontroller in LQFP144 package
™
Uno V3
BUS
UM2407 Rev 1
or external sources
UM2407