Ordering Information; Product Marking; Codification; Table 1. Ordering Information - STMicroelectronics STM32H7 Nucleo-144 User Manual

UM2407
2

Ordering information

To order the Nucleo-144 board corresponding to the targeted STM32, use the order code
given below in
Order code
NUCLEO-H743ZI
NUCLEO-H753ZI
2.1

Product marking

Evaluation tools marked as "ES" or "E" are not yet qualified and therefore not ready to be
used as reference design or in production. Any consequences deriving from such usage will
not be at ST charge. In no event, ST will be liable for any customer usage of these
engineering sample tools as reference design or in production.
"E" or "ES" marking examples of location:
•
On the targeted STM32H7 that is soldered on the board (for illustration of STM32H7
marking, refer to the STM32H7 datasheet "Package information" paragraph at the
www.st.com
•
Next to the evaluation tool ordering part number that is stuck or silk-screen printed on
the board.
These boards feature a specific STM32H7 device version which allows the operation of any
stack or library. This STM32H7 device shows a "U" marking option at the end of the
standard part number and is not available for sales.
2.2

Codification

The meaning of the codification is explained in
NUCLEO-XXYYZTN
XX
YY
Z
Table 1:

Table 1. Ordering information

Board reference
MB1364
website).

Table 2. Codification explanation

Description
MCU series in STM32 Arm Cortex MCUs STM32H7 Series
MCU Product line in the series
STM32 package pin count
UM2407 Rev 1
Target STM32H7
STM32H743ZIT6U
STM32H753ZIT6U
Table 2.
Example: NUCLEO-H743ZI2
STM32H743
144 pins
Ordering information
Differentiating feature
– Ethernet
– USB OTG FS on
Micro.AB connector
– ST-LINK/V2-1
– Ethernet
– USB OTG FS on
Micro.AB connector
– STLINK-V3E
– Cryptography
7/48
47