Main Features - STMicroelectronics STEVAL-IHM029V1 User Manual

UM0922
2

Main features

The main features of the STEVAL-IHM029V1 demonstration board are listed below.
●
Input voltage range: 90-265 VAC, 50/60 Hz
● 12 VDC / 5 VDC auxiliary power supply based on the VIPer16LN in buck converter
topology
●
Total power consumption below 300 mW in standby mode
●
Maximum output power: 2000 W
●
20-pin, 8-bit STM8S103F2 MCU as main controller
●
Employs zero-voltage switching (ZVS) to synchronize MCU events with the voltage
mains
●
Motor driven by T1235H high-temperature Triac in phase-angle control
●
5 power levels and standby mode selectable by potentiometer
●
5 LEDs to display the power level of the board
●
"RUN" LED to indicate the board is functioning
●
Standard in-circuit programming connector
●
IEC 61000-4-4 pre-compliance test passed (burst up to 8 kV)
●
IEC 61000-4-5 pre-compliance test passed (surge up to 2 kV)
●
RoHS compliant
Doc ID 17259 Rev 1
Main features
5/23