Message Alert Tone - AT&T EL52206 User Manual

Answering system
Answering system settings

Message alert tone

When the message alert tone is on, and there is at least one new message,
the telephone base beeps every 10 seconds. By default, the message alert
tone is set to Off.
To change the setting:
Press MENU/
1.
Press CID or DIR to scroll to Answering sys,
2.
then press
MENU
3. Press CID or DIR to scroll to Ans sys setup,
then press
MENU
Press CID or DIR to scroll to Msg alert tone, then
4.
/SELECT.
press
MENU
Press CID or DIR to choose On or Off.
5.
/SELECT to save your setting.
6. Press
MENU
NOTES:
• The message alert tone beeps only if all the following conditions are met:
– The answering system is on.
– The message alert tone is on.
– There are new messages.
To temporarily turn off the message alert tone, see Temporarily turn off the message alert
•
tone on page 63.
when the handset is idle.
SELECT
/SELECT.
/SELECT.
59
Msg alert tone
ECO
Off
ECO