Cushman HAULER 800X Technician's Repair And Service Manual page 28

Gasoline powered utility vehicle
Hide thumbs Also See for HAULER 800X:
Table of Contents

Advertisement

SAFETY
Read all of Section B and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
B
Center of
Front Axle
View from Underside of Vehicle
Fig. 2 Lifting the vehicle
Lower the jack and test the stability of the vehicle on the
two jack stands.
Place the jack at the center of the front axle. Raise the
vehicle and position jack stands under the frame cross-
member as indicated.
Lower the jack and test the stability of the vehicle on all
four jack stands.
If only the front or rear of the vehicle is to be raised,
place the chocks in front and behind each wheel not
being raised in order to stabilize the vehicle.
Lower the vehicle by reversing the lifting sequence.
Page B-4
Flat Portion
of Frame
Outside End
of Rear Axle
Repair and Service Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shuttle 4xHauler 1200x

Table of Contents