ENGINE
B
Read all of Section B and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
B
driving it off with the impact wrench and the clutch puller
bolt.
NOTICE
In some extreme cases, the clutch will be resistant to removal
In stubborn cases the clutch removal tool should be removed
and the cavity filled with grease. Install the clutch puller and
use the impact wrench to drive off the clutch. The combination
of hydraulic pressure (grease) and the impact wrench will
remove the most stubborn clutch. To prevent damage to the
clutch, be sure to remove all grease from the body of the clutch
since grease penetrating the seal may cause premature clutch
failure.
It is not necessary to remove the engine to remove the
clutch. Refer to the CONTINUOUSLY VARIABLE
TRANSMISSION (CVT) section for removal and installa-
tion.
Repair and Service Manual
Page G-11