Adding An Audio Sound On A Recorded Tape - Sony DCR-VX2000E Operating Instructions Manual

Audio dubbing
Adding an audio sound on a
recorded tape
(1) Insert the recorded tape into your
camcorder.
(2) Set the POWER switch to VCR on your
camcorder.
(3) Locate the recording start point by pressing
N. Then press X at the point where you
want to start recording to set your
camcorder to the playback pause mode.
(4) Press AUDIO DUB. The green
indicator appears on the LCD screen or in
the viewfinder.
(5) Press X and start playing back the audio
you want to record at the same time.
The new sound is recorded in stereo 2 (ST2)
during playback.
(6) Press x at the point where you want to
stop recording.
138
(1)
(2)
(3)
X
(4)
(5)
(6)
N
X
X
x
AUDIO DUB
POWER switch/
X