Adding An Audio Sound On A Recorded Tape; Monitoring The New Recorded Sound - Sony DVCAM DSR-PD170P Operating Instructions Manual

Audio dubbing

Adding an audio sound on a recorded tape

(1) Insert the recorded tape into your camcorder.
(2) Set the POWER switch to VCR on your camcorder.
(3) Locate the recording start point by pressing N. Then press X at the point
(4) Press
(5) Press X and start playing back the audio you want to record at the same time.
(6) Press x at the point where you want to stop recording.

Monitoring the new recorded sound

To play back the sound
Adjust the balance between the channels 1/2 (CH1/2) and the channels 3/4 (CH3/4) by
selecting AUDIO MIX in the menu settings (p. 105).
VCR SET
[ MENU ] : END
The default setting is for original sound only.
If you set the audio balance beforehand, you can monitor both the original sound and
dubbed sound during the dubbing.
88
where you want to start recording to set your camcorder to the playback pause
mode.
AUDIO DUB. The green
in the viewfinder.
The new sound is recorded in channels 3/4 during playback.
CH SELECT
AUD I O M I X
A/V DV OUT CH1 CH3
NTSC PB 2 4
RETURN
X indicator appears on the LCD screen or
AUDIO DUB
POWER