Sony DCR-VX2000E Operating Instructions Manual page 159

Changing the menu settings
Icon/item Mode
CM SEARCH
z ON
TAPE TITLE
TITLE DSPL
z ON
TITLEERASE
—
ITEM ERASE —
ERASE ALL —
REC MODE z SP
AUDIO MODE
z 12BIT
Notes on the LP mode
•When you record a tape in the LP mode on your camcorder, we recommend playing back the
tape on your camcorder. When you play back the tape on other camcorders or VCRs, noise may
occur in pictures or sound.
•When you record in the LP mode, we recommend using a Sony Excellence/Master mini DV
cassette so that you can get the most out of your camcorder.
•You cannot make audio dubbing on a tape recorded in the LP mode. Use the SP mode for the
tape to be audio-dubbed.
•When you record in the SP and LP modes on one tape or you record some scenes in the LP
mode, the playback picture may be distorted or the time code may not be written properly
between scenes.
Notes on AUDIO MODE
•You cannot dub an audio sound on a tape recorded in the 16-bit mode.
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO
MIX.
Meaning
To search using cassette memory (p. 93, 95, 97, 100).
OFF To search without using cassette memory.
To label a cassette (p. 149).
To display the title you have superimposed.
OFF Not to display the title.
To erase the title you have superimposed (p. 145).
To erase each item's data in cassette memory (p.
151).
To erase all the data in cassette memory (p. 153).
To record in the SP (Standard Play) mode.
LP To increase the recording time to 1.5 times the SP
mode.
To record in 12-bit mode (two stereo sounds).
16BIT To record in 16-bit mode (one stereo sound with
high quality).
POWER switch
VCR
VCR
CAMERA
VCR
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
159