Frame By Frame Recording - Cut Recording - Sony DCR-VX2000E Operating Instructions Manual

Frame by frame
recording – Cut
recording
You can make a recording with a stop-motion
animated effect using cut recording. To create
this effect, alternately move the subject a little
and make a cut recording. We recommend that
you use a tripod, and operate the camcorder
using the Remote Commander after step 6.
(1) Press MENU to display the menu in
standby mode.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select
FRAME REC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select
ON, then press the dial.
(5) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(6) Press START/STOP to start cut recording.
The camcorder makes a recording for about
six frames, and returns to recording
standby.
(7) Move the subject, and repeat step 6.
1
MENU
2-4
CAMERA SET
D ZOOM
16 : 9W I DE
STEADYSHOT
FRAME REC
I NT. REC
CAMERA SET
D ZOOM
16 : 9W I DE
[ MENU ] : END
STEADYSHOT
FRAME REC
I NT. REC
RETURN
CAMERA SET
D ZOOM
16 : 9W I DE
[ MENU ] : END
STEADYSHOT
FRAME REC
I NT. REC
RETURN
[ MENU ] : END
OFF
ON
ON
(1)
(2)
(3)
(4)
(5)
(6)
(7)
5
MENU
6,7
POWER
FRAME REC
87