Checking The Recording - End Search / Editsearch / Rec Review - Sony DCR-VX2000E Operating Instructions Manual

Checking the recording
– END SEARCH /
EDITSEARCH / Rec Review
You can use these buttons to check recorded
pictures or shoot so that the transition between
the last recorded scene and the next scene you
will record is smooth.
Searching the end point of
the recording — END SEARCH
You can easily go to the end of the last
recorded portion.
Press END SEARCH in standby mode.
The camcorder rewinds or fast-forwards the
tape and the last five-second recorded picture
is played back. After playback the camcorder
turns to standby mode. You can monitor the
sound from the speaker or headphones.
Changing the next recording
start point — EDITSEARCH
You can change the next recording start point
in standby mode.
Hold down the +/– side of EDITSEARCH in
standby mode. The recorded picture is played
back.
+ : to go forward
– : to go backward
Release EDITSEARCH to stop playback. If you
press START/STOP, re-recording begins from
the point you released EDITSEARCH. You
cannot monitor the sound.
36
END SEARCH
EDITSEARCH