Sony DCR-VX2000E Operating Instructions Manual page 184

Superimposing a still image in
a "Memory Stick" on a moving
picture – MEMORY MIX
Before operation
Insert a recorded "Memory Stick" and a mini
DV tape to be recorded into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX in standby mode.
The last recorded or last composed image
appears on the lower part of the screen as a
thumbnail image.
(3) Press MEMORY+/– or +/– on the Remote
Commander to select the still image you
want to superimpose.
To see the previous image, press MEMORY
– or – on the Remote Commander. To see
the next image, press MEMORY+ or + on
the Remote Commander.
(4) Turn the SEL/PUSH EXEC dial to select the
desired mode.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
y M. OVERLAP
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the
moving picture, and your camcorder is in
standby mode.
(6) Turn the SEL/PUSH EXEC dial to adjust
the effect.
(7) Press START/STOP to start recording.
184
(1)
(2)
(3)
(4)
y
y
(5)
(6)
(7)
y