Sony DCR-VX2000E Operating Instructions Manual page 71

Adjusting the white balance
Indicator Shooting conditions
• Adjusting the white balance
according to the light source.
This operation is not available during
recording. Follow the procedure
described below to adjust the setting
again.
(Outdoor) • Recording a sunset/sunrise, just after
sunset, just before sunrise, neon
signs, or fireworks
• Under a colour matching fluorescent
lamp
n (Indoor) • Lighting condition changes quickly
• Too bright a place such as a
photography studio
• Under sodium lamps or mercury
lamps
If you have selected
When you set the white balance to one-push
white balance mode, the setting is locked and
maintained even if lighting conditions change.
You can achieve recording with natural
colours without the image being affected by
ambient light.
(With the indicator on the screen)
(1) Shoot a white object such as paper fully.
(2) Press the SEL/PUSH EXEC dial.
The indicator flashes quickly. When the
white balance has been adjusted and stored in
the memory, the indicator stops flashing. The
setting will be maintained even if the battery is
detached.
To return to automatic adjustment
Set the AUTO LOCK selector to AUTO LOCK
or press WHT BAL. The white balance
indicator disappears from the LCD or
viewfinder screen.
n
in step 3
(1)
(2)
71